Currently Up-to-Date Version: Mac OS X 10.8.5 (UniBeast Method) This guide is all about installing Mountain Lion on your hackintosh. If you're looking to install regular old Lion, check out our. First, make sure your USB drive is formatted for use with a Mac, then download the OS X Lion installer from the App Store and copy it to your flash drive. Finally, use your bootable flash drive to install Lion on your Mac. Make Sure Your USB Drive Is Formatted for a Mac Not all USB drives can be used with a Mac right out of the box.

This tutorial shows you how to get Mac OS X 10.8.4 (Mountain Lion) running on a late-2006 Mac Mini (model A1176), which officially can only support up to Mac OS 10.6.8 (Snow Leopard), according to this Wikipedia article. Although I have not tested it myself, the same steps would probably work if you have an early-2006 Mac Mini.

Hardware upgrades

Mac Mini 2006 comes with a Core Solo or a Duo Core processor, whereas Mac OS X Mountain Lion requires at least a Core 2 Duo, so you will need to upgrade the processor on your Mac Mini first before continuing. Although it is possible to patch the installer to run on a Core Duo, I would still recommend upgrading for a straightforward installation experience. Compatible processors can be found on eBay for as low as US$20 and available at a wide variety of speeds – 2GHz, 2.16GHz or 2.33GHz. A detailed step-by-step guide on how to upgrade the processor can be found here.

Optionally, to make the whole process worthwhile, it is also recommended to upgrade the RAM. Although the Mac Mini 2006 comes with the Macmini1,1 firmware which can only support up to 2GB of RAM and will not boot if more than 2GB is installed, you can install up to 4GB (2 pieces of 667MHz laptop DDR2 SDRAM) by updating the firmware to Macmini2,1, originally meant for the Mac Mini 2007 family. The steps are summarized below:

1. Download the newer firmware from here http://www.mediafire.com/?lfangrn69rxln3q and extract it
2. Put the extracted files in /System/Library/CoreServices/Firmware Updates folder. Check the permissions of the files, or just do a chmod 777 on the files to be safe.
3. Run the following command in terminal:
   sudo bless-mount /-firmware/System/Library/CoreServices/Firmware Updates/EFIUpdaterApp.efi-payload/System/Library/CoreServices/Firmware Updates/LOCKED_MM11_0055_08B.fd-options “-x-apple-efi payload0-data” -verbose
4. Turn off the computer by shutting it down from the Apple menu.
5. Wait for a few seconds and press the power button until the power LED flashes. Wait until the flashing stops.
6. At this point the firmware upgrade is completed. You may see some distorted pictures on the screen, which is normal. Simply turn the Mac Mini off by pressing the Power button, and turn it back on
7. After a reboot, the Mac Mini should recognize 4GB of RAM.
8. If the machine doesn’t boot up or doesn’t recognize the extra RAM, check that the memory modules have been securely inserted. If it still doesn’t work, try to do a PRAM reset.

The machine can only use around 3.3 GB out of the total of 4GB that is recognized, due to limitations of the 32-bit processor. And while you are at it, take the time to upgrade the hard disk (a 2.5″ SATA drive) to an SSD, preferably 128GB or more. The final configuration, 2GHz Core 2 Duo with 4GB RAM and 128GB SSD, will make your Mac Mini 2006 machine performance more or less in line with the Mac Mini 2009, a much later model.

Preparing the installation

Before you proceed you will need to upgrade the OS on your Mac Mini to Snow Leopard 10.6.8, the last officially supported version. Next, get your Mountain Lion installer media ready – which can be a .DMG image or an actual DVD. After that, download MLPostfactor 0.3 from here, needed to patch the original Mountain Lion installer disk, which does not support the Mac Mini 2006, to run on your machine.

As at the time of writing this article (May 2015), MLPostfactor 0.3 only supports Mac OS up to 10.8.4. Versions 10.8.5 or above are not supported, so make sure that your installer is of the right version.

To make it easier to switch the boot partition without holding the Option key, you may also want to install a boot manager such as rEFIt.

Bypassing MLPostfactor limitation

Here comes the trick. The user interface for version 0.3 of MLPostfactor apparently only supports OS X Lion (10.7) and will refuse to run on 10.6. I tried to trick it by changing the system version number in /System/Library/CoreServices/SystemVersion.plist but things would still not work – MLPostfactor started but could not find Install OS X Mountain Lion.app in the Applications folder even though the installer was clearly there. A workaround would be to use MLPostfactor 0.2, which can run on Snow Leopard, to upgrade the system first to 10.7, and from there upgrade it to 10.8 by running MLPostfactor 0.3 again. I did not attempt this method because it seemed time consuming and most importantly, I had no installer disc for 10.7.

My relief came when I read this article which showed me how to use MLPostfactor from the command line. Apparently there is another MLPostfactor.app folder inside the original MLPostfactor app which can be invoked using the following command to patch the installer:

Surprisingly, there is no version check in the command line version of MLPostfactor and this method actually works to create the 10.8.4 installer partition. There are a few other commands that need to be done to patch the installer partition – refer to the original article for details.

Using MLPostfactor from bash script

A simpler way would be to use the MLPostfactor script written by pjherron available from github. With this script, the steps to upgrade to 10.8.4 from 10.6.8 on your Mac Mini can be summarized as below:

1. Download MLPostFactor 0.3 and unzip it to desktop
2. Copy the ‘Install OS X Mountain Lion.app’ folder from your 10.8.4 installer disc to the Applications folder
3. Create a 8 GB or larger partition on the target drive to host the patched installer. The volume label should be Install and it should be automatically mounted at /Volumes/Install
4. Create another partition, 20GB or more, on the target drive where you will install 10.8.4. Alternative, if you do not need the original Snow Leopard partition, you do not need to create this partition and can simply choose to install on the Snow Leopard partition later, losing all existing data.
5. Run the upgradesl2ml.sh script and give it 30 minutes to an hour to complete. When done, reboot the machine and choose to boot from the 10.8.4 installer partition just created
6. When prompted, choose to install 10.8.4 on the partition created in step 4, or simply overwrite your Snow Leopard partition. It is highly recommended to format the partition and perform a clean install – do not perform an upgrade as there are known issues.
7. Let the installer run. The process will either end in an error or a white screen – this is normal. Reboot the machine when this happens.
8. Choose to boot from the 10.8.4 installer partition again (not the partition where you installed 10.8.4 to).
9. When the installer finishes starting up, choose MLPostfactor from the Utilities menu and let it repair the partition where you’ve just installed 10.8.4
10. When the repair is done, reboot your system and choose to boot from your fresh Mountain Lion partition. It should boot normally
11. Done, you can now enjoy Mountain Lion on your Mac Mini 2006!

If the installation is successful, the About This Mac dialog should show something similar to below:

Common issues

In my experiment, the final system runs fine without major issues. Application such as Firefox, Skype or even xCode and the iOS simulator could run well. VLC player works well to play normal DivX or Xvid videos. The only major application that is problematic is Dropbox, which couldn’t even install due to error ‘no mountable filesystems’ when mounting the installer DMG. Tuxera NTFS can install and appears to work but will later cause random kernel panic when browsing NTFS partitions in Finder. I had to resort to removing Tuxera and learn to live with read-only NTFS support for now.

If your dock in Finder appears to be transparent after the installation, open Terminal and run the following command to fix it:

Ableton live 9 free. download full version mac reddit. Read here for other useful tips and tricks.

Other than the above issues, my installation of 10.8.4 on the Mac Mini is stable and serves me well as my daily work machine. My next attempt would be to install 10.9 (Mavericks) or 10.10 (Yosemite) on this computer. As far as I know, although there are proof-of-concept attempts, nobody has managed to get a stable working system yet, presumably due to challenges in getting graphics drivers to work properly.

See also

Upgrading the SSD in a mid-2012 Macbook Air
Keyboard issues in GRUB bootloader on a Mac Mini booting Mac OS, Windows and Ubuntu Linux

Mountain Lion is the latest OS X which is available to purchase and has access to download from the App Store. Mountain Lion is available in the format of digital download in the Mac App Store and not available on a disc. The installer size measures approximately 4.05 GB and can easily create a bootable USB installer drive for Mountain Lion. There are several Macs from which users can install at no additional charges. But, if you have never upgraded your Mac or any older version of Mountain Lion you still have the option to purchase the license for Mountain Lion as Apple lets you purchase Lion OS X 10.7, Snow Leopard OS X 10.6, and Mountain Lion (OS X 10.8).

With quite 65 million users—consumers, scientists, animators, developers, system administrators, and more—OS X is the most generally used UNIX® desktop operating system. Tight integration with hardware—from the sleek MacBook Air to the powerful Mac Pro—makes OS X the platform of choice for an emerging generation of power users.

The OS X kernel is predicated on FreeBSD and Mach 3.0 and features an extensible architecture supported well-defined kernel programming interfaces (KPIs). OS X was the primary OS to ship as one install that would boot into either a 32-bit or 64-bit kernel, either of which could run 32-bit and 64-bit applications at the full native performance. Starting with a cougar, OS X exclusively uses a 64-bit kernel, but it continues to run both 32-bit and 64-bit applications.

After the user receives a license, the user gets a notification of redemption code from Apple.

Apple Mac Os X Mountain Lion 10.8 Install Disc

Mountain Lion OS X 10.8 is one of the greatest operating systems from Apple. This version supports video conversion applications and runs at a rapid pace compared to others.

The user can run the installer from the older version or upgrade it too. But there are different kinds of reasons users might require to create a bootable installer.

Following is the list to how to create a bootable USB installer drive for Mountain Lion:

The user copy of Mountain Lion is installed on as many Macs you want at no additional cost. To install multiple Macs, a bootable USB installer is more scalable as compared to downloading on every individual computer. The user can also make your own bootable USB installer disk before any upgrades. If the user’s Mac is damaged or has any corrupt errors in the operating system. Moreover, it doesn’t allow you to boot then the user will never get a faster internet connection.

To create a bootable Mountain Lion USB installer disk, the user is required to get a copy of the installation file of Mountain Lion. If a user’s Mac runs on a previous version, the user can download it from the app store. Else, if a user has never experienced downloading then it needs to be purchased the license code for Mountain Lion and redeem it. Moreover, the user can also borrow from friends or colleagues to create the same file.

Install Mac Os X Mountain Lion.app Download

Make the OS X cougar Install Drive

• Launch Disk Utility and connect a USB drive to the Mac
• Select the USB drive from the left menu and click on on “Erase” tab, choose “Mac OS X Extended (Journaled)” because the format, then click on the “Erase” button within the corner
• Now select the formatted USB drive from the left side and click on on the “Restore” tab
• Drag the previously mounted “Mac OS X Install ESD” image into the “Source” section
• Drag the formatted partition to the “Destination” section, then click on “Restore”

Confirm that the USB drive will lose its data and enter the Admin password when asked

Disk Utility will now create a bootable OS X cougar installer drive out of USB drive using the disk image, this will take a touch while counting on how briskly the drive and Mac are but 20-30 minutes isn’t unusual.

Install Mac Os X Mountain Lion.app Download Free

How to Clean Install Mac OS X Mountain Lion 10.8 using USB

Install Mac Os X Mountain Lion App Store

You can clean install Mac OS X Mountain Lion 10.8 using USB by accessing the link below. Also, make sure that you have enough back up before you proceed with the same. There are a lot of duplicate ISO images on the market and it is best to download the same from a trusted source.